【待反馈】宝塔升级到[8.0.3]后无法进入
本帖最后由 堡塔运维小林 于 2023-10-15 21:32 编辑为了能快速了解并处理您的问题，请提供以下基础信息：面板、插件版本：8.0.3
系统版本：8.0.3
问题描述：8.0.3
相关截图（日志、错误）：升级到8.0.3版本后宝塔无法访问 bt-16和bt-22指令使用后也没用
BT-16
2023-10-15 20:40:34 (8.17 MB/s) - ‘/tmp/panel.zip’ saved
WARNING: You are using pip version 20.3.3; however, version 23.2.1 is available.
You should consider upgrading via the '/www/server/panel/pyenv/bin/python3.7 -m pip install --upgrade pip' command.
Looking in indexes: https://pypi.tuna.tsinghua.edu.cn/simple
Requirement already satisfied: pymysql in ./pyenv/lib/python3.7/site-packages/PyMySQL-0.9.3-py3.7.egg (0.9.3)
WARNING: You are using pip version 20.3.3; however, version 23.2.1 is available.
You should consider upgrading via the '/www/server/panel/pyenv/bin/python3.7 -m pip install --upgrade pip' command.
=====================================
kill: usage: kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l
Starting Bt-Panel... Bt-Panel (pid 505529 505567) already running
Starting Bt-Tasks... Bt-Tasks (pid 505565) already running
已成功升级到
bt-22
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "class/http_requests.py", line 104, in post
result = requests.post(url,data,timeout=timeout,headers=headers,verify=verify)
File "/www/server/panel/pyenv/lib/python3.7/site-packages/requests/api.py", line 119, in post
return request('post', url, data=data, json=json, **kwargs)
File "/www/server/panel/pyenv/lib/python3.7/site-packages/requests/api.py", line 61, in request
return session.request(method=method, url=url, **kwargs)
File "/www/server/panel/pyenv/lib/python3.7/site-packages/requests/sessions.py", line 542, in request
resp = self.send(prep, **send_kwargs)
File "/www/server/panel/pyenv/lib/python3.7/site-packages/requests/sessions.py", line 655, in send
r = adapter.send(request, **kwargs)
File "/www/server/panel/pyenv/lib/python3.7/site-packages/requests/adapters.py", line 504, in send
raise ConnectTimeout(e, request=request)
requests.exceptions.ConnectTimeout: HTTPSConnectionPool(host='www.bt.cn', port=443): Max retries exceeded with url: /api/wpanel/get_messages (Caused by ConnectTimeoutError(<urllib3.connection.HTTPSConnection object at 0x7fe9927aa950>, 'Connection to www.bt.cn timed out. (connect timeout=60)'))
您好，您到终端中执行bt 1命令重启一下面板，然后使用无痕浏览器访问面板，看看是否能正常访问，如果不能正常访问，请把页面截图发出来，另外您可以使用这个工具（https://tool.chinaz.com/port）去扫描一下面板对应的端口是否正常开放了，如果还未开放，去系统防火墙、安全组中开放对应的端口 bt 1试过不行 扫了一下端口 发现端口被关闭了 在宝塔打不开的情况下 如何进入系统防火墙安全组 开放端口？ bt 1指令用了还是无效 挺你的去扫端口了 发现端口处于关闭状态 在无法进入宝塔下的情况下如何进入系统防火墙 安全组中打开对应端口？ 堡塔运维小林 发表于 2023-10-15 21:32
您好，您到终端中执行bt 1命令重启一下面板，然后使用无痕浏览器访问面板，看看是否能正常访问，如果不能正 ...
端口 处于关闭状态如何使用SSH开放对应端口 堡塔运维小林 发表于 2023-10-15 21:32
您好，您到终端中执行bt 1命令重启一下面板，然后使用无痕浏览器访问面板，看看是否能正常访问，如果不能正 ...
使用工具后发现宝塔的端口现处于关闭状态 然后去终端关闭了防火墙 后宝塔端口还是处于关闭状态求解如何解决 您好，现在可以了吗
您好，您的问题解决了吗？期待您的回复。
页:
[1]