【待反馈】原来访问正常 现在无法访问了

原来安装好后使用一直正常， ssh连接上后bt命令正常, 重启面板也无效, 但访问重置，安全组已经打开端口，防火墙全部关闭

1. <div>正在执行(14)...</div>===============================================
   
2. ==================================================================
   
3. BT-Panel default info!
   
4. ==================================================================
   
5. 外网面板地址: <a  target="_blank">https://119.28.140.</a>***:12345/dmin
   
6. 内网面板地址: <a  target="_blank">http://10.0.0.3:12345/dmin</a>
   
7. *以下仅为初始默认账户密码，若无法登录请执行bt命令重置账户/密码登录
   
8. username: abcd123
   
9. password: c49620ce
   
10. If you cannot access the panel,
    
11. release the following panel port [12345] in the security group
    
12. 若无法访问面板，请检查防火墙/安全组是否有放行面板[12345]端口
    
13. ==================================================================

复制代码

1. [centos@nooob ~]$ mkdir bt_test
   
2. [centos@nooob ~]$ cd bt_test/
   
3. [centos@nooob bt_test]$ curl 127.0.0.1:12345/login
   
4. curl: (56) Recv failure: Connection reset by peer
   
5. [centos@nooob bt_test]$ netstat -lntup|grep 12345
   
6. (No info could be read for "-p": geteuid()=1000 but you should be root.)
   
7. tcp        0      0 0.0.0.0:12345           0.0.0.0:*               LISTEN      -                  
   
8. [centos@nooob bt_test]$ /etc/init.d/bt status
   
9. /etc/init.d/bt: line 17: cd: /www/server/panel: Permission denied
   
10. cat: /www/server/panel/BT-Panel: Permission denied
    
11. sed: can't read /www/server/panel/BT-Panel: Permission denied
    
12. cat: /www/server/panel/BT-Task: Permission denied
    
13. sed: can't read /www/server/panel/BT-Task: Permission denied
    
14. chmod: cannot access ‘/www/server/panel/BT-Panel’: Permission denied
    
15. chmod: cannot access ‘/www/server/panel/BT-Task’: Permission denied
    
16. cat: /www/server/panel/data/port.pl: Permission denied
    
17. cat: /www/server/panel/data/port.pl: Permission denied
    
18. Bt-Panel (pid 4097) already running
    
19. Bt-Task (pid 2381) already running
    
20. [centos@nooob bt_test]$

复制代码

您好，你需要切换到root账户下执行命令，同时执行下面命令重新启动面板看看有无报错。

1. /etc/init.d/bt restart

复制代码

谢花郎 发表于 2021-3-24 09:17
您好，你需要切换到root账户下执行命令，同时执行下面命令重新启动面板看看有无报错。

...

Stopping Bt-Tasks...    done
Stopping Bt-Panel...    done
Starting Bt-Panel....   done
Starting Bt-Tasks...    done

宝塔用户_xetvip 发表于 2021-3-24 21:56
Stopping Bt-Tasks...    done
Stopping Bt-Panel...    done
Starting Bt-Panel....   done

重启后能正常使用面板登陆URL地址访问嘛？

谢花郎 发表于 2021-3-25 09:40
重启后能正常使用面板登陆URL地址访问嘛？

不能，就算改了端口还是 访问重置