Raspberry pi 3 树莓派 宝塔后 PHP无法安装成功？

硬件是 Raspberry pi 3 树莓派，系统为centos 7 ARM，面板为宝塔5.2正式版
PHP各个版本，解析和快速方式均安装失败！请问和解？

进入ssh 输入此命令看看安装具体报什么错

1. cat /tmp/panelExec.log

复制代码

河妖 发表于 2017-10-21 16:38
进入ssh 输入此命令看看安装具体报什么错

我遇到同样问题，查询后如下：（帖子要求长度，分开发，继续看下楼）

1. /home$ cat /tmp/panelExec.log
   
2. --2017-10-22 05:04:24--  http://125.88.182.172:5880/install/0/php.sh
   
3. Connecting to 125.88.182.172:5880... connected.
   
4. HTTP request sent, awaiting response... 200 OK
   
5. Length: 44049 (43K) [application/octet-stream]
   
6. Saving to: 'php.sh'
   
7. 
   
8.      0K .......... .......... .......... .......... ...       100%  245K=0.2s
   
9. 
   
10. 2017-10-22 05:04:24 (245 KB/s) - 'php.sh' saved [44049/44049]
    
11. 
    
12. --2017-10-22 05:04:27--  http://125.88.182.172:5880/rpm/centos7/32/bt-curl-7.54.0.rpm
    
13. Connecting to 125.88.182.172:5880... connected.
    
14. HTTP request sent, awaiting response... 200 OK
    
15. Length: 737196 (720K) [application/x-redhat-package-manager]
    
16. Saving to: 'bt-curl-7.54.0.rpm'
    
17. 
    
18.      0K .......... .......... .......... .......... ..........  6%  374K 2s
    
19.     50K .......... .......... .......... .......... .......... 13%  573K 1s
    
20.    100K .......... .......... .......... .......... .......... 20% 11.0M 1s
    
21.    150K .......... .......... .......... .......... .......... 27%  783K 1s
    
22.    200K .......... .......... .......... .......... .......... 34% 11.2M 1s
    
23.    250K .......... .......... .......... .......... .......... 41% 1.73M 0s
    
24.    300K .......... .......... .......... .......... .......... 48% 12.5M 0s
    
25.    350K .......... .......... .......... .......... .......... 55% 1.63M 0s
    
26.    400K .......... .......... .......... .......... .......... 62% 10.3M 0s
    
27.    450K .......... .......... .......... .......... .......... 69% 11.4M 0s
    
28.    500K .......... .......... .......... .......... .......... 76% 2.69M 0s
    
29.    550K .......... .......... .......... .......... .......... 83% 8.16M 0s
    
30.    600K .......... .......... .......... .......... .......... 90% 2.29M 0s
    
31.    650K .......... .......... .......... .......... .......... 97% 5.26M 0s
    
32.    700K .......... .........                                  100% 10.0M=0.4s
    
33. 
    
34. 2017-10-22 05:04:27 (1.67 MB/s) - 'bt-curl-7.54.0.rpm' saved [737196/737196]
    
35. 
    
36. Preparing...                          ########################################
    
37.         package bt-curl-7.54.0-1.el7.centos.i686 is intended for a different architecture
    
38. --2017-10-22 05:04:27--  http://125.88.182.172:5880/rpm/centos7/32/bt-mhash-0.9.9.9.rpm
    
39. Connecting to 125.88.182.172:5880... connected.
    
40. HTTP request sent, awaiting response... 200 OK
    
41. Length: 169120 (165K) [application/x-redhat-package-manager]
    
42. Saving to: 'bt-mhash-0.9.9.9.rpm'
    
43. 
    
44.      0K .......... .......... .......... .......... .......... 30%  401K 0s
    
45.     50K .......... .......... .......... .......... .......... 60%  805K 0s
    
46.    100K .......... .......... .......... .......... .......... 90% 10.5M 0s
    
47.    150K .......... .....                                      100% 12.2M=0.2s
    
48. 
    
49. 2017-10-22 05:04:28 (857 KB/s) - 'bt-mhash-0.9.9.9.rpm' saved [169120/169120]
    
50. 
    
51. Preparing...                          ########################################
    
52.         package bt-mhash-0.9.9.9-1.el7.centos.i686 is intended for a different architecture
    
53. --2017-10-22 05:04:28--  http://125.88.182.172:5880/rpm/centos7/32/bt-libmcrypt-2.5.8.rpm
    
54. Connecting to 125.88.182.172:5880... connected.
    
55. HTTP request sent, awaiting response... 200 OK
    
56. Length: 102884 (100K) [application/x-redhat-package-manager]
    
57. Saving to: 'bt-libmcrypt-2.5.8.rpm'
    
58. 
    
59.      0K .......... .......... .......... .......... .......... 49%  352K 0s
    
60.     50K .......... .......... .......... .......... .......... 99%  699K 0s
    
61.    100K                                                       100%  902G=0.2s
    
62. 
    
63. 2017-10-22 05:04:28 (470 KB/s) - 'bt-libmcrypt-2.5.8.rpm' saved [102884/102884]
    
64. 
    
65. Preparing...                          ########################################
    
66.         package bt-libmcrypt-2.5.8-1.el7.centos.i686 is intended for a different architecture
    
67. ln: failed to create symbolic link '/usr/lib/libltdl.so.3': File exists
    
68. --2017-10-22 05:04:28--  http://125.88.182.172:5880/rpm/centos7/32/bt-mcrypt-2.6.8.rpm
    
69. Connecting to 125.88.182.172:5880... connected.
    
70. HTTP request sent, awaiting response... 200 OK
    
71. Length: 54144 (53K) [application/x-redhat-package-manager]
    
72. Saving to: 'bt-mcrypt-2.6.8.rpm'
    
73. 
    
74.      0K .......... .......... .......... .......... .......... 94%  350K 0s
    
75.     50K ..                                                    100% 11.7M=0.1s
    
76. 
    
77. 
    

复制代码

1. 2017-10-22 05:04:29 (369 KB/s) - 'bt-mcrypt-2.6.8.rpm' saved [54144/54144]
   
2. 
   
3. Preparing... ########################################
   
4. package bt-mcrypt-2.6.8-1.el7.centos.i686 is intended for a different architecture
   
5. --2017-10-22 05:04:29-- http://125.88.182.172:5880/rpm/centos7/32/bt-libiconv-1.14.rpm
   
6. Connecting to 125.88.182.172:5880... connected.
   
7. HTTP request sent, awaiting response... 200 OK
   
8. Length: 912204 (891K) [application/x-redhat-package-manager]
   
9. Saving to: 'bt-libiconv-1.14.rpm'
   
10. 
    
11. 0K .......... .......... .......... .......... .......... 5% 349K 2s
    
12. 50K .......... .......... .......... .......... .......... 11% 703K 2s
    
13. 100K .......... .......... .......... .......... .......... 16% 2.65M 1s
    
14. 150K .......... .......... .......... .......... .......... 22% 1.00M 1s
    
15. 200K .......... .......... .......... .......... .......... 28% 5.24M 1s
    
16. 250K .......... .......... .......... .......... .......... 33% 2.48M 1s
    
17. 300K .......... .......... .......... .......... .......... 39% 10.9M 0s
    
18. 350K .......... .......... .......... .......... .......... 44% 1.04M 0s
    
19. 400K .......... .......... .......... .......... .......... 50% 10.9M 0s
    
20. 450K .......... .......... .......... .......... .......... 56% 4.84M 0s
    
21. 500K .......... .......... .......... .......... .......... 61% 10.3M 0s
    
22. 550K .......... .......... .......... .......... .......... 67% 6.17M 0s
    
23. 600K .......... .......... .......... .......... .......... 72% 1.13M 0s
    
24. 650K .......... .......... .......... .......... .......... 78% 11.6M 0s
    
25. 700K .......... .......... .......... .......... .......... 84% 11.0M 0s
    
26. 750K .......... .......... .......... .......... .......... 89% 11.0M 0s
    
27. 800K .......... .......... .......... .......... .......... 95% 11.5M 0s
    
28. 850K .......... .......... .......... .......... 100% 459K=0.5s
    
29. 
    
30. 2017-10-22 05:04:29 (1.61 MB/s) - 'bt-libiconv-1.14.rpm' saved [912204/912204]
    
31. 
    
32. Preparing... ########################################
    
33. package bt-libiconv-1.14-1.el7.centos.i686 is intended for a different architecture
    
34. 鎵€鏈夊墠缃緷璧栧凡缁忓畨瑁呭畬鎴愶紒
    
35. php.sh: line 234: /etc/init.d/php-fpm-53: No such file or directory
    
36. --2017-10-22 05:04:34-- http://125.88.182.172:5880/src/php-5.3.29.tar.gz
    
37. Connecting to 125.88.182.172:5880... connected.
    
38. HTTP request sent, awaiting response... 200 OK
    
39. Length: 14972714 (14M) [application/octet-stream]
    
40. Saving to: '/www/server/php/53/src.tar.gz'
    
41. 
    
42. 0K .......... .......... .......... .......... .......... 0% 336K 43s
    
43. 50K .......... .......... .......... .......... .......... 0% 710K 32s
    
44. 100K .......... .......... .......... .......... .......... 1% 11.1M 22s
    
45. 150K .......... .......... .......... .......... .......... 1% 710K 21s
    
46. 200K .......... .......... .......... .......... .......... 1% 2.22M 18s
    
47. 250K .......... .......... .......... .......... .......... 2% 11.4M 15s
    
48. 300K .......... .......... .......... .......... .......... 2% 859K 15s
    
49. 350K .......... .......... .......... .......... .......... 2% 1.43M 15s
    
50. 400K .......... .......... .......... .......... .......... 3% 4.90M 13s
    
51. 450K .......... .......... .......... .......... .......... 3% 11.4M 12s
    
52. 500K .......... .......... .......... .......... .......... 3% 777K 13s
    
53. 550K .......... .......... .......... .......... .......... 4% 5.34M 12s
    
54. 600K .......... .......... .......... .......... .......... 4% 4.77M 11s
    
55. 650K .......... .......... .......... .......... .......... 4% 11.1M 10s
    
56. 700K .......... .......... .......... .......... .......... 5% 11.5M 10s
    
57. 750K .......... .......... .......... .......... .......... 5% 11.1M 9s
    
58. 800K .......... .......... .......... .......... .......... 5% 11.5M 9s
    
59. 850K .......... .......... .......... .......... .......... 6% 11.2M 8s
    
60. 900K .......... .......... .......... .......... .......... 6% 1.32M 8s
    
61. 950K .......... .......... .......... .......... .......... 6% 7.72M 8s
    
62. 1000K .......... .......... .......... .......... .......... 7% 6.06M 8s
    
63. 1050K .......... .......... .......... .......... .......... 7% 10.7M 7s
    
64. 1100K .......... .......... .......... .......... .......... 7% 11.0M 7s
    
65. 1150K .......... .......... .......... .......... .......... 8% 10.8M 7s
    
66. 1200K .......... .......... .......... .......... .......... 8% 5.95M 6s
    
67. 1250K .......... .......... .......... .......... .......... 8% 11.2M 6s
    
68. 1300K .......... .......... .......... .......... .......... 9% 11.5M 6s
    
69. 1350K .......... .......... .......... .......... .......... 9% 291K 7s
    
70. 1400K .......... .......... .......... .......... .......... 9% 11.2M 7s
    
71. 1450K .......... .......... .......... .......... .......... 10% 11.5M 7s
    
72. 1500K .......... .......... .......... .......... .......... 10% 10.7M 7s
    
73. 1550K .......... .......... .......... .......... .......... 10% 11.6M 7s
    
74. 1600K .......... .......... .......... .......... .......... 11% 11.0M 6s
    
75. 1650K .......... .......... .......... .......... .......... 11% 11.2M 6s
    
76. 1700K .......... .......... .......... .......... .......... 11% 11.5M 6s
    
77. 1750K .......... .......... .......... .......... .......... 12% 11.0M 6s
    
78. 1800K .......... .......... .......... .......... .......... 12% 11.1M 6s
    
79. 1850K .......... .......... .......... .......... .......... 12% 10.9M 6s
    
80. 1900K .......... .......... .......... .......... .......... 13% 11.7M 5s
    
81. 1950K .......... .......... .......... .......... .......... 13% 1.67M 5s
    
82. 2000K .......... .......... .......... .......... .......... 14% 11.5M 5s
    
83. 2050K .......... .......... .......... .......... .......... 14% 11.0M 5s
    
84. 2100K .......... .......... .......... .......... .......... 14% 11.1M 5s
    
85. 2150K .......... .......... .......... .......... .......... 15% 11.6M 5s
    
86. 2200K .......... .......... .......... .......... .......... 15% 11.1M 5s
    
87. 2250K .......... .......... .......... .......... .......... 15% 1.92M 5s
    
88. 2300K .......... .......... .......... .......... .......... 16% 11.3M 5s
    
89. 2350K .......... .......... .......... .......... .......... 16% 11.4M 5s
    
90. 2400K .......... .......... .......... .......... .......... 16% 11.0M 5s
    
91. 2450K .......... .......... .......... .......... .......... 17% 120K 6s
    
92. 2500K .......... .......... .......... .......... .......... 17% 11.2M 6s
    
93. 2550K .......... .......... .......... .......... .......... 17% 11.0M 6s
    
94. 2600K .......... .......... .......... .......... .......... 18% 11.5M 6s
    
95. 2650K .......... .......... .......... .......... .......... 18% 3.15M 6s
    
96. 2700K .......... .......... .......... .......... .......... 18% 11.3M 6s
    
97. 2750K .......... .......... .......... .......... .......... 19% 6.25M 6s
    
98. 2800K .......... .......... .......... .......... .......... 19% 11.3M 6s
    
99. 2850K .......... .......... .......... .......... .......... 19% 698K 6s
    
100. 2900K .......... .......... .......... .......... .......... 20% 11.2M 6s
     
101. 2950K .......... .......... .......... .......... .......... 20% 4.99M 6s
     
102. 3000K .......... .......... .......... .......... .......... 20% 5.01M 6s
     
103. 3050K .......... .......... .......... .......... .......... 21% 11.4M 6s
     
104. 3100K .......... .......... .......... .......... .......... 21% 4.95M 5s
     
105. 3150K .......... .......... .......... .......... .......... 21% 11.5M 5s
     
106. 3200K .......... .......... .......... .......... .......... 22% 10.9M 5s
     
107. 3250K .......... .......... .......... .......... .......... 22% 8.28M 5s
     
108. 3300K .......... .......... .......... .......... .......... 22% 11.0M 5s
     
109. 3350K .......... .......... .......... .......... .......... 23% 11.7M 5s
     
110. 3400K .......... .......... .......... .......... .......... 23% 11.0M 5s
     
111. 3450K .......... .......... .......... .......... .......... 23% 7.06M 5s
     
112. 3500K .......... .......... .......... .......... .......... 24% 8.88M 5s
     
113. 3550K .......... .......... .......... .......... .......... 24% 10.8M 5s
     
114. 3600K .......... .......... .......... .......... .......... 24% 1.75M 5s
     
115. 3650K .......... .......... .......... .......... .......... 25% 11.2M 5s
     
116. 3700K .......... .......... .......... .......... .......... 25% 11.3M 5s
     
117. 3750K .......... .......... .......... .......... .......... 25% 10.4M 5s
     
118. 3800K .......... .......... .......... .......... .......... 26% 11.6M 4s
     
119. 3850K .......... .......... .......... .......... .......... 26% 11.1M 4s
     
120. 3900K .......... .......... .......... .......... .......... 27% 2.90M 4s
     
121. 3950K .......... .......... .......... .......... .......... 27% 4.43M 4s
     
122. 4000K .......... .......... .......... .......... .......... 27% 10.4M 4s
     
123. 4050K .......... .......... .......... .......... .......... 28% 5.21M 4s
     
124. 4100K .......... .......... .......... .......... .......... 28% 4.94M 4s
     
125. 4150K .......... .......... .......... .......... .......... 28% 5.07M 4s
     
126. 4200K .......... .......... .......... .......... .......... 29% 11.2M 4s
     
127. 4250K .......... .......... .......... .......... .......... 29% 11.5M 4s
     
128. 4300K .......... .......... .......... .......... .......... 29% 82.8K 5s
     
129. 4350K .......... .......... .......... .......... .......... 30% 11.1M 5s
     
130. 4400K .......... .......... .......... .......... .......... 30% 10.9M 5s
     
131. 4450K .......... .......... .......... .......... .......... 30% 11.0M 5s
     
132. 4500K .......... .......... .......... .......... .......... 31% 11.4M 5s
     
133. 4550K .......... .......... .......... .......... .......... 31% 11.2M 5s
     
134. 4600K .......... .......... .......... .......... .......... 31% 11.5M 5s
     
135. 4650K .......... .......... .......... .......... .......... 32% 11.0M 5s
     
136. 4700K .......... .......... .......... .......... .......... 32% 11.4M 5s
     
137. 4750K .......... .......... .......... .......... .......... 32% 1.09M 5s
     
138. 4800K .......... .......... .......... .......... .......... 33% 5.00M 5s
     
139. 4850K .......... .......... .......... .......... .......... 33% 5.07M 5s
     
140. 4900K .......... .......... .......... .......... .......... 33% 11.0M 5s
     
141. 4950K .......... .......... .......... .......... .......... 34% 4.98M 5s
     
142. 
     
143. .....删除了一部分，太长

复制代码

1. 
   
2. 2017-10-22 05:04:41 (2.10 MB/s) - '/www/server/php/53/src.tar.gz' saved [14972714/14972714]
   
3. 
   
4. --2017-10-22 05:04:51-- http://125.88.182.172:5880/src/patch/php-5.3-multipart-form-data.patch
   
5. Connecting to 125.88.182.172:5880... connected.
   
6. HTTP request sent, awaiting response... 200 OK
   
7. Length: 2152 (2.1K) [application/octet-stream]
   
8. Saving to: '/patch/php-5.3-multipart-form-data.patch'
   
9. 
   
10. 0K .. 100% 57.9M=0s
    
11. 
    
12. 2017-10-22 05:04:51 (57.9 MB/s) - '/patch/php-5.3-multipart-form-data.patch' saved [2152/2152]
    
13. 
    
14. patching file main/rfc1867.c
    
15. creating cache ./config.cache
    
16. checking for Cygwin environment... no
    
17. checking for mingw32 environment... no
    
18. checking for egrep... grep -E
    
19. checking for a sed that does not truncate output... /bin/sed
    
20. checking host system type... armv7l-unknown-linux-gnueabi
    
21. checking target system type... armv7l-unknown-linux-gnueabi
    
22. shtool:echo:Warning: unable to determine terminal sequence for bold mode
    
23. shtool:echo:Warning: unable to determine terminal sequence for bold mode
    
24. checking for gcc... gcc
    
25. checking whether the C compiler (gcc ) works... yes
    
26. checking whether the C compiler (gcc ) is a cross-compiler... no
    
27. checking whether we are using GNU C... yes
    
28. checking whether gcc accepts -g... yes
    
29. checking how to run the C preprocessor... gcc -E
    
30. checking for icc... no
    
31. checking for suncc... no
    
32. checking whether gcc and cc understand -c and -o together... yes
    
33. checking how to run the C preprocessor... gcc -E
    
34. checking for AIX... no
    
35. checking whether ln -s works... yes
    
36. checking for system library directory... lib
    
37. checking whether to enable runpaths... no
    
38. checking if compiler supports -R... yes
    
39. checking for gawk... gawk
    
40. checking for bison... bison -y
    
41. checking for bison version... invalid
    
42. configure: warning: bison versions supported for regeneration of the Zend/PHP parsers: 1.28 1.35 1.75 1.875 2.0 2.1 2.2 2.3 2.4 2.4.1 2.4.2 2.4.3 2.5 2.5.1 2.6 2.6.1 2.6.2 2.6.4 (found: 3.0.4).
    
43. checking for re2c... no
    
44. configure: warning: You will need re2c 0.13.4 or later if you want to regenerate PHP parsers.
    
45. checking whether to enable computed goto gcc extension with re2c... no
    
46. checking whether to force non-PIC code in shared modules... no
    
47. checking whether /dev/urandom exists... yes
    
48. checking for pthreads_cflags... -pthread
    
49. checking for pthreads_lib...
    
50. 
    
51. Configuring SAPI modules
    
52. checking for AOLserver support... no
    
53. checking for Apache 1.x module support via DSO through APXS... no
    
54. checking for Apache 1.x module support... no
    
55. checking whether to enable Apache charset compatibility option... no
    
56. checking for Apache 2.0 filter-module support via DSO through APXS... no
    
57. checking for Apache 2.0 handler-module support via DSO through APXS... yes
    
58. checking for Apache 1.x (hooks) module support via DSO through APXS... no
    
59. checking for Apache 1.x (hooks) module support... no
    
60. checking whether to enable Apache charset compatibility option... no
    
61. checking for Caudium support... no
    
62. checking for CLI build... yes
    
63. checking for Continuity support... no
    
64. checking for embedded SAPI library support... no
    
65. checking for FPM build... no
    
66. checking for Zeus ISAPI support... no
    
67. checking for LiteSpeed support... no
    
68. checking for Milter support... no
    
69. checking for NSAPI support... no
    
70. checking for PHTTPD support... no
    
71. checking for Pi3Web support... no
    
72. checking whether Roxen module is build using ZTS... no
    
73. checking for Roxen/Pike support...
    
74. checking for thttpd... no
    
75. checking for TUX... no
    
76. checking for webjames... no
    
77. checking for chosen SAPI module... apache2handler
    
78. 
    
79. Running system checks
    
80. checking for sendmail... /sbin/sendmail
    
81. checking whether system uses EBCDIC... no
    
82. checking whether byte ordering is bigendian... no
    
83. checking whether writing to stdout works... This is the test message -- yes
    
84. checking for socket... yes
    
85. checking for socketpair... yes
    
86. checking for htonl... yes
    
87. checking for gethostname... yes
    
88. checking for gethostbyaddr... yes
    
89. checking for yp_get_default_domain... no
    
90. checking for __yp_get_default_domain... no
    
91. checking for yp_get_default_domain in -lnsl... yes
    
92. checking for dlopen... no
    
93. checking for __dlopen... no
    
94. checking for dlopen in -ldl... yes
    
95. checking for sin in -lm... yes
    
96. checking for inet_aton... yes
    
97. checking for ANSI C header files... yes
    
98. checking for dirent.h that defines DIR... yes
    
99. checking for opendir in -ldir... no
    
100. checking for inttypes.h... yes
     
101. checking for stdint.h... yes
     
102. checking for dirent.h... yes
     
103. checking for ApplicationServices/ApplicationServices.h... no
     
104. checking for sys/param.h... yes
     
105. checking for sys/types.h... yes
     
106. checking for sys/time.h... yes
     
107. checking for netinet/in.h... yes
     
108. checking for alloca.h... yes
     
109. checking for arpa/inet.h... yes
     
110. checking for arpa/nameser.h... yes
     
111. checking for assert.h... yes
     
112. checking for crypt.h... yes
     
113. checking for dns.h... no
     
114. checking for fcntl.h... yes
     
115. checking for grp.h... yes
     
116. checking for ieeefp.h... no
     
117. checking for langinfo.h... yes
     
118. checking for limits.h... yes
     
119. checking for locale.h... yes
     
120. checking for monetary.h... yes
     
121. checking for netdb.h... yes
     
122. checking for pwd.h... yes
     
123. checking for resolv.h... yes
     
124. checking for signal.h... yes
     
125. checking for stdarg.h... yes
     
126. checking for stdlib.h... yes
     
127. checking for string.h... yes
     
128. checking for syslog.h... yes
     
129. checking for sysexits.h... yes
     
130. checking for sys/ioctl.h... yes
     
131. checking for sys/file.h... yes
     
132. checking for sys/mman.h... yes
     
133. checking for sys/mount.h... yes
     
134. checking for sys/poll.h... yes
     
135. checking for sys/resource.h... yes
     
136. checking for sys/select.h... yes
     
137. checking for sys/socket.h... yes
     
138. checking for sys/stat.h... yes
     
139. checking for sys/statfs.h... yes
     
140. checking for sys/statvfs.h... yes
     
141. checking for sys/vfs.h... yes
     
142. checking for sys/sysexits.h... no
     
143. checking for sys/varargs.h... no
     
144. checking for sys/wait.h... yes
     
145. checking for sys/loadavg.h... no
     
146. checking for termios.h... yes
     
147. checking for unistd.h... yes
     
148. checking for unix.h... no
     
149. checking for utime.h... yes
     
150. checking for sys/utsname.h... yes
     
151. checking for sys/ipc.h... yes
     
152. checking for dlfcn.h... yes
     
153. checking for assert.h... (cached) yes
     
154. checking for fopencookie... yes
     
155. checking for broken getcwd... no
     
156. checking for broken libc stdio... yes
     
157. checking whether struct tm is in sys/time.h or time.h... time.h
     
158. checking for tm_zone in struct tm... yes
     
159. checking for missing declarations of reentrant functions... done
     
160. checking for fclose declaration... ok
     
161. checking for tm_gmtoff in struct tm... yes
     
162. checking for struct flock... yes
     
163. checking for socklen_t... yes
     
164. checking size of size_t... 4
     
165. checking size of long long... 8
     
166. checking size of long long int... 8
     
167. checking size of long... 4
     
168. checking size of int... 4
     
169. checking size of intmax_t... 8
     
170. checking size of ssize_t... 4
     
171. checking size of ptrdiff_t... 4
     
172. checking for st_blksize in struct stat... yes
     
173. checking for st_blocks in struct stat... yes
     
174. checking for st_rdev in struct stat... yes
     
175. checking for size_t... yes
     
176. checking for uid_t in sys/types.h... yes
     
177. checking for struct sockaddr_storage... yes
     
178. checking for field sa_len in struct sockaddr... no
     
179. checking for IPv6 support... yes
     
180. checking for vprintf... yes
     
181. checking for alphasort... yes
     
182. checking for asctime_r... yes
     
183. checking for chroot... yes
     
184. checking for ctime_r... yes
     
185. checking for cuserid... yes
     
186. checking for crypt... no
     
187. checking for flock... yes
     
188. checking for ftok... yes
     
189. checking for funopen... no
     
190. checking for gai_strerror... yes
     
191. checking for gcvt... yes
     
192. checking for getloadavg... yes
     
193. checking for getlogin... yes
     
194. checking for getprotobyname... yes
     
195. checking for getprotobynumber... yes
     
196. checking for getservbyname... yes
     
197. checking for getservbyport... yes
     
198. checking for gethostname... (cached) yes
     
199. checking for getrusage... yes
     
200. checking for gettimeofday... yes
     
201. 
     

复制代码

1. checking for gmtime_r... yes
   
2. checking for getpwnam_r... yes
   
3. checking for getgrnam_r... yes
   
4. checking for getpwuid_r... yes
   
5. checking for grantpt... yes
   
6. checking for inet_ntoa... yes
   
7. checking for inet_ntop... yes
   
8. checking for inet_pton... yes
   
9. checking for isascii... yes
   
10. checking for link... yes
    
11. checking for localtime_r... yes
    
12. checking for lockf... yes
    
13. checking for lchown... yes
    
14. checking for lrand48... yes
    
15. checking for memcpy... yes
    
16. checking for memmove... yes
    
17. checking for mkstemp... yes
    
18. checking for mmap... yes
    
19. checking for nl_langinfo... yes
    
20. checking for perror... yes
    
21. checking for poll... yes
    
22. checking for ptsname... yes
    
23. checking for putenv... yes
    
24. checking for realpath... yes
    
25. checking for random... yes
    
26. checking for rand_r... yes
    
27. checking for scandir... yes
    
28. checking for setitimer... yes
    
29. checking for setlocale... yes
    
30. checking for localeconv... yes
    
31. checking for setenv... yes
    
32. checking for setpgid... yes
    
33. checking for setsockopt... yes
    
34. checking for setvbuf... yes
    
35. checking for shutdown... yes
    
36. checking for sin... yes
    
37. checking for snprintf... yes
    
38. checking for srand48... yes
    
39. checking for srandom... yes
    
40. checking for statfs... yes
    
41. checking for statvfs... yes
    
42. checking for std_syslog... no
    
43. checking for strcasecmp... yes
    
44. checking for strcoll... yes
    
45. checking for strdup... yes
    
46. checking for strerror... yes
    
47. checking for strftime... yes
    
48. checking for strnlen... yes
    
49. checking for strptime... yes
    
50. checking for strstr... yes
    
51. checking for strtok_r... yes
    
52. checking for symlink... yes
    
53. checking for tempnam... yes
    
54. checking for tzset... yes
    
55. checking for unlockpt... yes
    
56. checking for unsetenv... yes
    
57. checking for usleep... yes
    
58. checking for utime... yes
    
59. checking for vsnprintf... yes
    
60. checking for vasprintf... yes
    
61. checking for asprintf... yes
    
62. checking for nanosleep... yes
    
63. checking for nanosleep in -lrt... yes
    
64. checking for getaddrinfo... yes
    
65. checking for __sync_fetch_and_add... yes
    
66. checking for strlcat... no
    
67. checking for strlcpy... no
    
68. checking for getopt... yes
    
69. checking whether utime accepts a null argument... yes
    
70. checking for working alloca.h... (cached) yes
    
71. checking for alloca... yes
    
72. checking for declared timezone... yes
    
73. checking for type of reentrant time-related functions... POSIX
    
74. checking for readdir_r... yes
    
75. checking for type of readdir_r... POSIX
    
76. checking for in_addr_t... yes
    
77. checking for crypt_r... no
    
78. 
    
79. General settings
    
80. checking whether to include gcov symbols... no
    
81. checking whether to include debugging symbols... no
    
82. checking layout of installed files... PHP
    
83. checking path to configuration file... /www/server/php/53/etc
    
84. checking where to scan for configuration files...
    
85. checking whether to enable safe mode by default... yes
    
86. checking for safe mode exec dir... /usr/local/php/bin
    
87. checking whether to enable PHP's own SIGCHLD handler... no
    
88. checking whether to enable magic quotes by default... yes
    
89. checking whether to explicitly link against libgcc... no
    
90. checking whether to enable short tags by default... yes
    
91. checking whether to enable dmalloc... no
    
92. checking whether to enable IPv6 support... yes
    
93. checking how big to make fd sets... using system default
    
94. 
    
95. Configuring extensions
    
96. checking size of long... (cached) 4
    
97. checking size of int... (cached) 4
    
98. checking for int32_t... yes
    
99. checking for uint32_t... yes
    
100. checking for sys/types.h... (cached) yes
     
101. checking for inttypes.h... (cached) yes
     
102. checking for stdint.h... (cached) yes
     
103. checking for string.h... (cached) yes
     
104. checking for stdlib.h... (cached) yes
     
105. checking for strtoll... yes
     
106. checking for atoll... yes
     
107. checking for strftime... (cached) yes
     
108. checking which regex library to use... php
     
109. checking whether to enable LIBXML support... yes
     
110. checking libxml2 install dir... /usr
     
111. checking for xml2-config path... /usr/bin/xml2-config
     
112. checking whether libxml build works... yes
     
113. checking for OpenSSL support... yes
     
114. checking for Kerberos support... no
     
115. checking for DSA_get_default_method in -lssl... no
     
116. checking for X509_free in -lcrypto... yes
     
117. checking for pkg-config... /bin/pkg-config
     
118. checking for OpenSSL version... >= 0.9.6
     
119. checking for CRYPTO_free in -lcrypto... yes
     
120. checking for SSL_CTX_set_ssl_version in -lssl... yes
     
121. checking for PCRE library to use... bundled
     
122. checking whether to enable the SQLite3 extension... yes
     
123. checking bundled sqlite3 library... yes
     
124. checking for ZLIB support... yes
     
125. checking if the location of ZLIB install directory is defined... no
     
126. checking for gzgets in -lz... yes
     
127. checking whether to enable bc style precision math functions... yes
     
128. checking for BZip2 support... no
     
129. checking whether to enable calendar conversion support... no
     
130. checking whether to enable ctype functions... yes
     
131. checking for cURL support... yes
     
132. checking if we should use cURL for url streams... no
     
133. checking for cURL in default path... found in /usr
     
134. checking for cURL 7.10.5 or greater... libcurl 7.29.0
     
135. checking for SSL support in libcurl... yes
     
136. checking how to run the C preprocessor... gcc -E
     
137. checking for openssl support in libcurl... no
     
138. checking for gnutls support in libcurl... no
     
139. checking for curl_easy_perform in -lcurl... yes
     
140. checking for curl_version_info in -lcurl... yes
     
141. checking for curl_easy_strerror in -lcurl... yes
     
142. checking for curl_multi_strerror in -lcurl... yes
     
143. checking for QDBM support... no
     
144. checking for GDBM support... no
     
145. checking for NDBM support... no
     
146. checking for Berkeley DB4 support... no
     
147. checking for Berkeley DB3 support... no
     
148. checking for Berkeley DB2 support... no
     
149. checking for DB1 support... no
     
150. checking for DBM support... no
     
151. checking for CDB support... no
     
152. checking for INI File support... no
     
153. checking for FlatFile support... no
     
154. checking whether to enable DBA interface... no
     
155. checking whether to enable DOM support... yes
     
156. checking for xml2-config path... (cached) /usr/bin/xml2-config
     
157. checking whether libxml build works... (cached) yes
     
158. checking for ENCHANT support... no
     
159. checking whether to enable EXIF (metadata from images) support... no
     
160. checking for fileinfo support... no
     
161. checking whether to enable input filter support... yes
     
162. checking pcre install prefix... no
     
163. checking whether to enable FTP support... yes
     
164. checking OpenSSL dir for FTP... no
     
165. checking for OpenSSL version... >= 0.9.6
     
166. checking for CRYPTO_free in -lcrypto... (cached) yes
     
167. checking for SSL_CTX_set_ssl_version in -lssl... (cached) yes
     
168. checking for GD support... yes
     
169. checking for the location of libjpeg... yes
     
170. checking for the location of libpng... yes
     
171. checking for the location of libXpm... no
     
172. checking for FreeType 2... /usr/local/freetype
     
173. checking for T1lib support... no
     
174. checking whether to enable truetype string function in GD... yes
     
175. checking whether to enable JIS-mapped Japanese font support in GD... no
     
176. checking for fabsf... yes
     
177. checking for floorf... yes
     
178. checking for jpeg_read_header in -ljpeg... yes
     
179. checking for png_write_image in -lpng... yes
     
180. If configure fails try --with-xpm-dir=<DIR>
     
181. checking for FT_New_Face in -lfreetype... yes
     
182. checking for GNU gettext support... yes
     
183. checking for bindtextdomain in -lintl... no
     
184. checking for bindtextdomain in -lc... yes
     
185. checking for ngettext in -lc... yes
     
186. checking for dngettext in -lc... yes
     
187. checking for dcngettext in -lc... yes
     
188. checking for bind_textdomain_codeset in -lc... yes
     
189. checking for GNU MP support... no
     
190. checking for mhash support... yes
     
191. checking whether to enable hash support... yes
     
192. checking whether byte ordering is bigendian... (cached) no
     
193. checking size of short... 2
     
194. checking size of int... (cached) 4
     
195. checking size of long... (cached) 4
     
196. checking size of long long... (cached) 8
     
197. checking for iconv support... yes
     
198. checking for iconv... yes
     
199. checking if iconv is glibc's... yes
     
200. checking if iconv supports errno... yes
     
201. checking if your cpp allows macro usage in include lines... yes
     
202. checking for IMAP support... no
     
203. checking for IMAP Kerberos support... no
     
204. checking for IMAP SSL support... no
     
205. checking for InterBase support... no
     
206. checking whether to enable internationalization support... no
     
207. checking whether to enable JavaScript Object Serialization support... yes
     
208. checking for ANSI C header files... (cached) yes
     
209. checking for LDAP support... no
     
210. checking for LDAP Cyrus SASL support... no
     
211. checking whether to enable multibyte string support... yes
     
212. checking whether to enable multibyte regex support... yes
     
213. checking whether to check multibyte regex backtrack... yes
     
214. checking for external libmbfl... no
     
215. checking for external oniguruma... no
     
216. checking for variable length prototypes and stdarg.h... yes
     
217. checking for stdlib.h... (cached) yes
     
218. checking for string.h... (cached) yes
     
219. checking for strings.h... yes
     
220. checking for unistd.h... (cached) yes
     
221. checking for sys/time.h... (cached) yes
     
222. checking for sys/times.h... yes
     
223. checking for stdarg.h... (cached) yes
     
224. checking size of int... (cached) 4
     
225. checking size of short... (cached) 2
     
226. checking size of long... (cached) 4
     
227. checking for working const... yes
     
228. checking whether time.h and sys/time.h may both be included... yes
     
229. checking for working alloca.h... (cached) yes
     
230. checking for alloca... (cached) yes
     
231. checking for 8-bit clean memcmp... yes
     
232. checking for stdarg.h... (cached) yes
     
233. checking for mcrypt support... yes
     
234. configure: error: mcrypt.h not found. Please reinstall libmcrypt.
     
235. make: *** No targets specified and no makefile found. Stop.
     
236. make: *** No rule to make target `install'. Stop.
     
237. ========================================================
     
238. ERROR: php-5.3 installation failed.

复制代码

河妖 发表于 2017-10-21 16:38
进入ssh 输入此命令看看安装具体报什么错

错误文档.zip (7.39 KB, 下载次数: 8300)

2017-10-22 19:16 上传

点击文件名下载附件

粘贴太麻烦，这个文件里是我请空日志后，编译安装php5.2，后的日志

明天上班给你发个补正脚本

河妖 发表于 2017-10-22 21:14
明天上班给你发个补正脚本

麻烦帮我看下...

我用的PI3的官方系统
直接编译安装

1. wget http://download.bt.cn/install/ext/lib-clean.sh && sh lib-clean.sh

复制代码

进ssh 执行这条命令 按y回车
然后再面板用编译方式装个低版本的Php看能不能装上

睿鑫网络科技 发表于 2017-10-23 22:17

但官方的是Debian内核，类似ubuntu 有些功能用不了，虽然不会影响，但有点强迫
类似linux 工具箱中，时区选择上海后，设置无效，IP设置功能不能用。

卖菜先生 发表于 2017-10-24 09:53
但官方的是Debian内核，类似ubuntu 有些功能用不了，虽然不会影响，但有点强迫 ...

其实我个人更习惯使用Centos

河妖 发表于 2017-10-24 09:26
进ssh 执行这条命令 按y回车
然后再面板用编译方式装个低版本的Php看能不能装上 ...

执行命令后，安装5.2PHP，其它也安装失败